Two sets of three tough 3D Printed replacement lowercase holder for any C64C/MKII style Commodore 64 that has its hooks / clips / hinges snapped or broken off... Simply cleanup the area then glue in place.
DESIGN ONE | EASY FIT (set of 3)
One set of three is designed to be put on what's left from the old ones.
The slim one is for left side, center one is designed to fit neatly next to the RF modulator, and normal one is for right side of the case. Easy fit with no additional tools required.
DESIGN TWO (set of 3)
This set of three is designed to be glued tightly onto the case once you have removed the remnants of the old ones with a sharp blade or dremel.
What's included:- 2 Different Designs
- 2 Sets of 3 clips (use the design that works best for you or a combination or the two)
- Simply Fixing Guide
* Colour of pieces may differ.
Commodore 64C MKII Lowercase Rear Eyelet Clips
DESIGN ONE | EASY FIT | No additional tools required.
Attach the clips in the appropriate places (one at a time) with Superglue or similar.
The slim one is for left side, center one is designed to fit neatly next to the RF modulator, and normal one is for right side of the case.
Temporarilyhold in place with a butterfly-clip or peg until glue set.
Allow adequate time for the glue to set before fixing your machine back together.
DESIGN TWO
Remove the old clips using a sharp knife or dremel, ensuring the surfuace is clean and flat.
Attach the clips in the appropriate places (one at a time) with Superglue or similar.
Tempararliy hold in place with a butterfly-clip or peg until glue set.
Allow adequate time for the glue to set before fixing your machine back together.