top of page

Works with the Gotek Floppy Emulator Drive along side a 3.5" PC Drive!


A Gotek USB Floppy Drive Emulator AND A 3.5" PC Floppy Drive connected SIMULTANEOUSLY to the external drive connector of ANY AMIGA 500/600/1200! (Not compatible with Escom's A1200)
(Just set your Gotek's jumper to 'S1' for stand alone use, or to 'S0', for use along with a pc floppy)

The Gotek and PC Drive can be connected alone directly to amiga or chained connected to external drive(s)!
(Please note: your Gotek drive must have the appropriate firmware for amiga, either Cortex , Hxc  or FlashFloppy)


Use a PC floppy drive on your Amiga!


Enhancement! Use the 2 small switches to Select drive order! 
This could be VERY useful, if you also have a Drive Boot Selector installed, In order to Boot from either a Gotek/HxC Drive or the PC floppy Drive! 


Can be used just for Gotek or Gotek & PC Drive!

Fully tested using an Amiga 500 with 1.3 Kickstart and Amiga 500+/600 with 2.04 Kickstart,
 (Kickstart 2.04 and above offers booting from external drives, using boot menu (press both mouse buttons on power)


Please note: 

* If using using HD 3.5" disks along with the pc floppy drive connected to amiga, be sure to cover the 2nd hole with a little duct tape in order to enable the pc drive's  DD/720Kb operation mode (Works with Amiga's 880k disks). 
* Although the adapter has been tested with many 3.5" pc floppy drives, we cannot guarantee that it will work with all 3.5" floppy drives.


External Dual Gotek & PC Floppy drive cable for Amiga

Out of Stock

    Related Products